Laboratory Cell Culture CO2 Incubator
Laboratory Cell Culture CO2 Incubator
Laboratory Cell Culture CO2 Incubator
Laboratory Cell Culture CO2 Incubator
Laboratory Cell Culture CO2 Incubator
Model
MD-120/180/240

Item specifics

Brand
AiksMed
Mode
Air Jacketed
Volume
120L, 180L, 240L
Control
temperature, CO2 concentration, Humidty

Review

Description

Laboratory clean bench biosafety cabinet
CO2 Incubator for Cell Culture
Well-designed air-jacketed CO2 incubator with 120/180/240L capacity, providing a suitable, and stable environment for cell/tissue culture. 10-Inch touch screen for more intuitive operation.
Unique Features
* 6 -sided air jacketed heating;
* PID control;
* Infrared CO2 sensor;
* 140℃ dry heat sterilization;
* Built-in HEPA;
* Temperature Uniformity: ≤0.3℃;
* Temperature diviation alarm.
Advantages
Data Management: 
Real-time view of parameter curves: temperature, CO2 concentration, and O2 concentration;
Data logging and download function.

Touch Screen: 10-Inch color touch screen, clear and Intuitive display, USB interface for Data output.

CO2 Control: Infrared (IR) CO2 content sensor, not affected by temperature and humidity changes, stable control and long service life;
Fast CO2 recovery: closes door after opening for 30sec, and  CO2 content recovers to 5%  of set level within 5min, achieving rapid stability and uniformity;

Temperature Control:
* High-precision temperature sensor to ensure accurate control of interior temperature;
* 6 sided heating prevents condensate generating, it avoids breeding bacteria and causing pollution to cultivation environment.

Contamination Control:
* Air inlet equipped with HEPA to effectively filter bacteria and dust particles ≥0.3μm in CO2.
* Built-in HEPA can quickly maintain the air cleanliness to ISO5 level after operation. 
* 140℃ dry heat sterilization to provide safe experimental environment.
* With heating function, inner glass can prevent condensate, avoids the risk of microbial contamination, meanwhile it is convenient for observing experimental process.

Humanized Design: 
* Detachable, anti-dumping, integrated shelf can be disassembled without tools.
* HEPA is easy to disassemble and install without tools.
* Visual glass door for easy experimental observation.

Integrated Interior: 
* 304 stainless steel, corrosion-resistant, 100% arc design, no dead corners, easy to clean, effectively prevent contamination of microorganisms.

Test Hole:
* Connected to external temperature, CO2 content, humidity sensors, and etc.;
* Cable or control line can be introduced through it, when auxiliary equipment needed, without leading the wire from door, to ensure the sealing of interior.

Sampling Hole:
* Interior parameters such as temperature and gas content can be measured through it.
Safety System:
* High temperature, low temperature and over-heat alarm
* Cooling fan automatic start and stop
* CO2 content too high or too less alarm
* Sterilize palm rejection
* HEPA replace alert
Specifications
Vertical Laminar Flow Cabinet
Model
MD-120
  MD-180
 MD-240
External Size(W*D*H)  
  480x500x500mm   
   500x520x710mm 
600x620x650mm
Internal Size(W*D*H)  
  560x620x710mm    
  580x640x940mm 
 680x740x860mm
Heating Mode   
Air jacketed
Temperature
Control range
±0.3℃(37℃)
Thermal uniformity
±0.3℃(37℃)
Alarm setup
Upper limit: (C+0.1) ~ (C+1.0); Lower limit: (C-0.1) ~ (C-5.0)
Sensor 
Pt1000 Platinum thermistor
Controller  
PID
Sterilization Method   
140℃ dry heat sterilization
CO2 Concentration
Control range
±0.1%(5%),0-20%
Sensor 
Heat-resistant infrared (IR) sensor
Inlet Pressure 
 1.0 bar (recommended)
Readability & Setability   
   0.10%
Uniformity   
±0.3%
Humidity
Range
up to 95%
Method
Natural